GEOFLEX

• SUBSTRATE PREPARATION
Existing concrete or mortar surfaces must be cleaned thoroughly to remove dust, grease, surfacing salts, algae and dirt in general. For crumbling or gypsum or anhydrite surfaces, treat first with PRIMER FIX (1). Self adhesive sealing tape COVERBAND ADHESIVE to be applied on any edge and sectioning joint (2).
• MIX PREPARATION
GEOFLEX is prepared by mixing the product with right quantity clean water (see table). Pour the powder product into the water and mix with a drill on low speed until a uniform paste is obtained with no lumps. Do not mix

GEOFLEX is a pre-mixed powder based on special hydraulic binders and synthetic resins which, when mixed with clean water, provides a spreadable mortar with high adhesion to all of the most common building supports.