ASPHALTMULL

Waterproofing water-based bituminous paste.
– Good resistance to saline solutions.
– Easy cold applying.
– Long lasting product.
– Odourless and non-flammable product.
– Non-toxic, solvent free.
– Waterproofing of concrete structures such as foundations and retaining walls.
– Suitable for forming a leveling mortar after mixing with class 32.5 R cement and sand (weight ratio: 1/3 Cement, 1/3 sand, 1/3 Asfaltmull) and addition of water in quantity, according to the desired workability , equal to about 20 – 25% on the weight of the mixture.
– It is particularly suitable where solvent-based products are forbidden.

– Blake sure that the surface is free from detached parts, loose debris or non-adherent
parts, coatings, rust, powder, disarming oils and carefully clean the surfaces, that must be
sound and dry.
– It can be applied also on wet surfaces, as it contains additives that gives grip.
– Apply at temperatures between +5°C and +35°C, avoiding extreme weather conditions such as heat and cold during the application and the drying of the film.
– Mix Asfaltmull before use.
– It is ready for use and can be applied by broom, brush or roller.
– Apply 2 layers to enhance the product performance.
– The second layer should be applied when the first one is perfectly dried.
– Before application, it is advisable to check the solidity and efficiency of the surface water runoff points to be waterproofed.
– On fasades it is recommended to cover the coat with decorative or reflective water- based paints.
– Tools should be washed with water right after the use; If the product had dried on them, remove it mechanically or with a thinner.
The average total consumption is of 0,8-1,2 Kg/m*.

– Apply the product at room temperature not below +5° C, avoiding extreme weather conditions such as heat and cold or simply fog, rain and frost.
– The product must not be applied on surfaces subject to water stagnation.
– Do not apply on very hot surfaces, that might have negative consequences on the cohesion and the adhesion of the product on the surface.
– Keep the product away from frost. The product must be applied or stocked at a temperature above +5O C. Once the product gets frozen, it is not recoverable anymore.
– For further information please ask for safety datasheet.
– Read the information reported at the end of this data sheet.
Metal or plastic pails of 1, 5, 10, 20 kg.